Learn how to remove and replace the hard disk drive assembly for HP ProBook 655 G1 Notebook PC. More support options for your HP device are available at
Follow these steps to remove and replace the hard disk drive assembly for HP ProBook 655 G1 Notebook PC:
- NOTE: The following video depicts a specific configuration of the notebook.
- The same removal and replacement procedures apply to all configurations of the notebook.
- Before you begin: Remove the battery and service door.
- Removal
- Disconnect the hard disk drive adapter cable from its connector on the system board.
- Loosen the four captive P1 Phillips-head screws that secure the hard disk drive assembly to the base enclosure.
- Grasp the black mylar tab on the hard disk drive assembly and lift the hard disk drive assembly out of the hard disk drive bay.
- Place the hard disk drive assembly in a static dissipative bag.
- Replacement
- Remove the hard disk drive assembly from the static dissipative bag.
- Place the hard disk drive assembly into the hard disk drive bay.
- Tighten the four captive P1 Phillips-head screws that secure the hard disk drive assembly to the base enclosure.
- Connect the hard disk drive adapter cable into its connector on the system board.
Caution: Improperly installing or replacing parts could damage your HP device or void your warranty. Before replacing any parts, check your warranty.
Continue the Conversation:
#HP #HPSupport #HPComputerService
SUBSCRIBE: www.youtube.com/HPSupport
SHOP NOW:
About HP:
HP Inc. creates technology that makes life better for everyone everywhere - every person, every organization, and every community around the globe. Through our portfolio of printers, PCs, mobile devices, solutions, and services, we engineer experiences that amaze.
Connect with HP:
Visit HP WEBSITE:
Like HP on FACEBOOK:
Follow HP on TWITTER:
Follow HP on INSTAGRAM:
Follow HP on LINKEDIN:
This video was produced by HP.
0 Comments